Typical representation of Shimpo DT-315P Harsh Environment NEMA 4X (IP65) Stroboscope Click for larger image.
Product picture of DT-315P Shimpo Harsh Environment NEMA 4X (IP65) Stroboscope for illustration purposes only. Actual product may vary.

Harsh Environment NEMA 4X (IP65) Stroboscope

Part number: DT-315P | Request a quote
With its rugged, metal body and NiCd rechargeable battery this portable stroboscope ( DT-315P series) is astonishingly built for Harsh Applications. Equipped with Phase shifting in angle of delay (0-359 degrees) and flash time delay, (0-300 mSEC) the DT-315P is engineered for checking timing and wear on rotating and reciprocating machinery.

Accredited calibration/NIST traceable calibration certificate for Shimpo DT-315P Harsh Environment NEMA 4X (IP65) Stroboscope might be available on request (for an extra charge). Please contact us for more info.

Shimpo Harsh Environment NEMA 4X (IP65) Stroboscope: instrument description

When you keep your mind focused on choosing a most featured, accurated and battery operated stroboscope available to work in harsh environments then the DT-315P manufactured by Shimpo will meet all your expectation. Equipped with rugged, metal body and NiCd rechargeable battery the Shimpo DT-315P is incredibly useful stroboscope where the other speed inspection tools will not be able to perform with the same accuracy of speed measurements up to 3300 FPM or stop-motion inspection. The Shimpo DT-315P strobe-tach delivers an incredibly simple and intuitive experience while using its interface. While the machine is running, phase shift/time shift flash control provides precise timing / visual inspection in hard to reach areas and its internal and external trigger feature provides flash control by by manual or external signal input, such as sensors and contact switches.

SHIMPO DT-315P Features

  • Extruded aluminum, NEMA 4X construction: Extraordinary durability yields long service life
  • Internal battery supply: Lightweight; enables easy portability
  • Repeatable accuracy (± 0.01% of reading): Fully meets the strictest tolerances
  • Phase shift (in degrees of delay time): Enables visual analysis of rotating/reciprocating objects through all points of motion/time/angle
  • Flash timer control: Prolongs flash tube life
  • Manual flash controller knob: Permits easy/accurate adjustments to flash rate
  • Continuous duty cycle: Eliminates downtime waiting for unit to cool
  • Highly polished focused reflector: Prevents “blind” viewing areas

DT-315P Product specifications

Internal Mode Model DT-315P
Flashing Range 60.0 ~ 3,000 FPM
Display Accuracy ±0.01%
Drift ± 0.01 (at 0 ~ 40° C)
Phase Shift Use +/- push buttons (360° in 6 seconds)
Display Update Time 0.2 sec approx
Output Signal Approx. 12V
Other Functions ÷2. x2 Flashings, Phase shift adjustment
External Mode Flashings Synchronous Mode: 60.0 ~ 3,000FPM / Delay mode:200 ~ 3,000 FPM
Delay Angle Setting Range Delay Mode: 0 ~ 359°, Set by 1°
Display RPM, Synchronous mode: 60.0 ~ 3000FPM Delay Angle, Delay mode: 0 ~ 359° or 0 ~ 300mS conversion display
Display Accuracy Synchronous mode: ± 0.01% plus ± 1 digit Delay mode:+ 0 -0.2mS plus ± 1 digit
Update Time 1 per second
Input Signal H Level:2.5 ~ 12V L level:0 ~ 0.4V 50 μs or over for H.L. level Trigger at rising edge Approx. 10Ωimpedance
Sensor Power Battery:6.8 ~ 11.0V Adapter:10.2 ~ 12.2V DC:9 ~ 14.5V : 7.8 ~ 14.1V Max. 40mA (including max 0.6V Ripple)
Setter Flashing, Delay angle: Jog Shuttle Mode, Display Unit: Tact Switch
General Display 5 digit, 7 segment red LED (Character height 10mm)
Flashtube Xenon lamp TFU-100B-A32
Flashtube Power Max. 10W
Flashing Time Approx. 30 μ sec
Power Battery: Nicd battery, 8KR – 2000 sce SANYO, Operating time: Approx. 1 hour (full charge at 3000 FPM); Battery Charge Time: Approx. 10 hours Do not operate over 10 hours continuously
External power: Disconnect the built-in battery before operating instrument by external power)
DC9 14.5V, Max. 24W (current consumption is 24W/input voltage) or operate by provided adapter; AC115V 10%, 50/60 Hz Max. 40VA
Operating Temperature 32° to 104° F (0° to 40° C)
Power Requirement Power Plug & Cable for Recharging Battery Included
Dimensions 5.11” W x 6.22” H x 10.20” L (130 W x 158 H x 259 L mm)
Product Weight Approx. 4.6 lbs (2.1 kg)
Package Weight 6.15 lbs (2.79 kg)
Warranty 2-Year
Included Accessories Input/Output signal plug, rechargeable battery with AC adapter, protective case


BAT-DT315A/P Internal battery for DT-315P
DT-315P-CHGR AC adapter/charger for DT-315P
FLASHTUBE-311-2 Replacement flash tube for DT-315P
SAS-DT300 Permanent mount swing arm

Ordering details

DT-315P Harsh Environment NEMA 4X (IP65) Stroboscope with Included rechargeable battery, power cable and protective case  
DT-315P-230V Heavy duty, internal battery powered stroboscope, IP65 rated, 230V charger  
NIST-STROBE NIST traceable certificate for digital stroboscopes, includes data  

Ordering info

As a canadian distributor of Shimpo Instruments products we stock most of these Stroboscopes for same day shipping. To enquire on the Shimpo DT-315P Harsh Environment NEMA 4X (IP65) Stroboscope availability and current list price please contact us.


There are yet no reviews for this product.