Menu

Typical representation of Shimpo DT365-DT365E High Intensity LED Stroboscopes Click for larger image.
Product picture of DT365-DT365E Shimpo High Intensity LED Stroboscopes for illustration purposes only. Actual product may vary.

High Intensity LED Stroboscopes

Part number: DT365-DT365E | Request a quote
The DT-365/DT-365E High-Intensity, Battery Powered LED Stroboscopes are velocity analyzing and measuring devices that are ideal for machinery process inspection

Accredited calibration/NIST traceable calibration certificate for Shimpo DT365-DT365E High Intensity LED Stroboscopes might be available on request (for an extra charge). Please contact us for more info.

Shimpo High Intensity LED Stroboscopes: instrument description

The DT-365/DT-365E Stroboscopes are capable of flashing their LED lights in a synchronous frequency to the operating machinery, creating the illusion of viewing slowed or frozen images. Utilizing this phenomenon of slowing or stopping the motion with the adjusted flash rate of its LED lights, machine parts and processes may be inspected for defects, aiding in preventative maintenance programs. This LED technology extends operation due to the low energy requirement of the light diodes compared with xenon lit stroboscopes. Proper operation is assured as concern of light failure during usage common with xenon bulbs, is eliminated. The light output (Lux) of the LED’s is far brighter than xenon powered stroboscopes with its array of 6 LED’s. (18 LED for SHIMPO DT-365)

The operation panel is a vibrant red LED display that is ideal for viewing in dark locations. The simple to use keypad plus rate adjustment dial aids in making quick changes of the flash rate to coincide with changes in the speed of your process. The dial allows fine-tune altering of the flash rate while the x2/÷2 keys enable large spanning over the entire flash range.

The DT-365E’s have the added feature of modifying the flash duration or on time which aids in picture clarity often necessary in printing processes. The phase shift function is ideal for rotating equipment where the user needs to change the focus on different blades, gears, or section of the machinery. These stroboscopes are also capable of being synchronized with an input signal. The robust aluminum housing is NEMA-4X (IP65) protected allowing usage in harsh plant environments.

Typical applications for the DT-365/DT-365E are to determine speeds, inspect rotors, meshing gears, motors, textile equipment, printing production lines, conveyors, industrial fans, pump operation, vibration equipment diagnostics and many more.

Features

  • Extraordinary durability with extruded aluminum, NEMA 4X (IP65) construction
  • Bright LED display and simple controls aid in user operation
  • Long Lasting, quick-charge NiMH rechargeable battery provides exceptional usage reliability
  • Phase shift (in degrees of delay time) enables visual analysis of rotating or reciprocating objects through all points of motion/time/angle
  • Flash controller dial permits accurate adjustments to the flash rate
  • LED technology greatly extends operation life and eliminates need to replace burned out bulbs
  • Capable of being synchronized with input signal from sensor or controller

Specifications

Model SHIMPO DT-365 (18 LED) SHIMPO DT-365E (6 LED)
Range FPM (RPM) 60-120,000; From Input Signal 40-35,000
Accuracy ±0.02% of reading
Lux Rating (Approx.) 6000 FPM & 3.6° (100 μs): Distance 8˝ (20 cm) 18,400 lx with 10˝ (250 mm) irradiation dia., Distance 20˝ (50 cm) 6200 lx with 13.5˝ (350 mm) irradiation dia. 6000 FPM & 3.6° (100 μs): Distance 8˝ (20 cm) 10,000 lx with 8.25˝ (210 mm) irradiation dia.; Distance 20˝ (50 cm) 2075 lx with 10˝ (250 mm) irradiation dia.
1500 FPM & 3.6° (400 μs): Distance 8˝ (20 cm) 15,000 lx with 10˝ (250 mm) irradiation dia., Distance 20˝ (50 cm) 6000 lx with 13.5˝ (350 mm) irradiation dia. 1500 FPM & 3.6° (400 μs): Distance 8˝ (20 cm) 9750 lx with 8.25˝ (210 mm) irradiation dia.; Distance 20˝ (50 cm) 2050 lx with 10˝ (250 mm) irradiation dia.
Lamp Lifetime Typ. 50,000 hours. Varies depending on usage.
Display 6 digit Red LED
Resolution Internal Mode 1 FPM. External Mode 0.1 FPM
Flash Duration 0.1 to 3.6° (0.14 μsec to 400 μsec) 0.1 to 3.6°
Phase Shift 0 to 999 msec; 0 to 359° 0 to 359°
Power Requirement 100 to 230 VAC to included AC power adapter
Battery NiMH battery requires approximate 2.5 hour recharge time
Battery Life Approx. 2 hrs. with flash duration set to 3.6° & 5 hrs. with duration set to 1.0° Approx. 3 hrs. with flash duration set to 3.6° & 8 hrs. when duration set to 1.0°
Synchronization Input Signal H level: 2.5 – 12V; L level: 0 – 0.4V NPN Open Collector 12-24 VDC
Input Signal Range FPM (RPM) 40 – 35,000
Input Signal Flash Delay FPM (RPM) 60-10,000
Input Signal 12V pulse input NPN open collector DC30V, 50 mA
Power Supply Output DC12V 40mA for sensor input -
Temperature Limits 32 to 95°F (0 to 35°C)
Humidity Limits 35 to 85% RH
Protection Class NEMA 4X (IP65)
Product Weight 4.6 lbs (2.1 kg)
Package Weight 6 lbs (2.72 kg)
Approvals RoHs
Warranty 2-Year
Included Accessories AC power adapter, Input signal connector, flash-light style attachable handle

Ordering info

As a canadian distributor of Shimpo Instruments products we stock most of these Stroboscopes for same day shipping. To enquire on the Shimpo DT365-DT365E High Intensity LED Stroboscopes availability and current list price please contact us.

Reviews

There are yet no reviews for this product.